Steel Strong-Wall® Installation of Cold-Formed Steel Two-Story Stacked on Concrete
- Do not cut the Steel Strong-Wall or enlarge existing holes. Doing so will compromise the performance of the wall.
- Do not use an impact wrench to tighten nuts on the anchor bolts.
- Drill or notch the subfloor to allow the compression nut to sit flush with the underside of the 2nd-story wall (notching of the rim joist may also be required).

Shear-Transfer Plate Fasteners

Two-Story Stacked Wall Connection Kit

- Two heavy hex nuts included with each wall.
Catalog Page
Order free catalogs by mail