text.skipToContent text.skipToNavigation

Steel Strong-Wall®: Installation of Cold-Formed Steel Two-Story Stacked on Concrete

  • Do not cut the Steel Strong-Wall® or enlarge existing holes. Doing so will compromise the performance of the wall.
  • Do not use an impact wrench to tighten nuts on the anchor bolts.
  • Drill or notch the subfloor to allow the compression nut to sit flush with the underside of the 2nd-story wall (notching of the rim joist may also be required).
47a-2010

Shear-Transfer Plate Fasteners

47a-2010-1

Two-Story Stacked Wall Connection Kit

46b-2010
  1. Two heavy hex nuts included with each wall.

Catalog Page

C-CFS-17 Catalog Information

Order free catalogs by mail