ABU Adjustable and Standoff Post Base
Machine Bolt Condition
The AB series of retrofit adjustable post bases provide a 1" standoff for the post, are slotted for adjustability and can be installed with nails, Strong-Drive® SD Connector screws or bolts (ABU). Depending on the application needs, these adjustable standoff post bases are designed for versatility, cost-effectiveness and maximum uplift performance.
Fasteners
Machine Bolt
Installation
1
If using an adhesive anchor, see Adhesive Anchor Instructions.
Si usa un ancla adhesiva, consulte las Instrucciones de Anclaje Adhesivo.
2
3
4
5
6
7
Bolt holes must be a minimum of 1/32" and a maximum of 1/16" larger than bolt diameter. See table below.
Los ori cios para los pernos deben ser al menos 1/32" y como máximo 1/16" más grandes que el diámetro del perno. Vea la tabla de abajo.
8
Machine Bolt Diameter: 1/2"
Length:
ABU44/ABU46 = 4 1/2"
ABU66 = 6 1/2"
Perno Torneado Diámetro: 1/2"
Largo:
ABU44/ABU46 = 4 1/2"
ABU66 = 6 1/2"
