Formulated for high-strength anchorage of threaded rod and rebar into cracked and uncracked concrete and masonry under a wide range of conditions, AT-XP® adhesive dispenses easily in cold or warm environments and in below-freezing temperatures with no need to warm the cartridge. When mixed properly, this low-odor formula is a dark teal color for easy post-installation identification.
SET-XP® epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system with the resin and hardener being simultaneously dispensed and mixed through the mixing nozzle. When properly mixed, adhesive will be a uniform teal color for easy post-installation identification.
Hammer Drill
Nylon Brush
Air Gun
Cartridge Dispenser
1
2
Compressed air (80 psi min.), 4 seconds (min.)
Aire comprimido (80 psi mín.), Adhesive Anchor 4 segundos (mín.)
3
Nylon brush 4 cycles (min.)
Cepillo de nailon 4 ciclos (mín.)
4
Compressed air (80 psi min.), 4 seconds (min.)
Aire comprimido (80 psi mín.), 4 segundos (mín.)
Dispense until uniform color
Aplique hasta lograr un color uniforme.
5
6