H2.5A Hurricane Tie
The H2.5A single-sided hurricane tie is designed to resist moderate loads at the rafter/truss-to-top-plate connection. As part of a continuous load path, the H2.5A resists both lateral and uplift loads. The symmetrical design eliminates the need for separate right and left parts.
Tools
Hammer
Fasteners
0.131" x 2 1/2" Nail
Installation
1
2
Rafter
Cabrio
3
Truss
Viga
Installations in Pairs
Instalaciones en Pares
Both connectors shall be same model.
Ambos conectores deben ser del mismo modelo.
Install diagonally across from each other for minimum 2x truss.
Instale diagonalmente uno respecto del otro para dejar una cercha de 2x como mínimo.