LSTA straps are load rated and provide the correct thickness and number of fasteners the specifier is looking for compared with field-fabricated straps.
Install strap ties where top or bottom plates are cut, at wall intersections, and as ridge ties. Reduce the allowable load based on the size and quantity of fasteners used.
Refer to applicable code for minimum edge and end distances.
10d (0.148" x 3") Nail
10d x 1 1/2" (0.148" x 1 1/2") Nail
For I-joist installation only.
Sólo para instalación de vigas en ‘I’.
Bend strap one time only. Max 12/12 joist pitch.
Doble las alas una vez.
Hanger not shown for clarity.
El soporte colgante no se muestra para ofrecer mayor claridad.