MASA Mudsill Anchor
Mudsill anchors have always been a time-saving alternative to anchor bolts, and the MASA anchors provide an even greater load-carrying capacity alternative for 5/8" and 1/2" mudsill anchor bolts on 2x, double-2x and 3x mudsills. It also eliminates the need for 3" square plate washers for seismic design and, in some cases, has load capacities that meet or exceed the parallel- and perpendicular-to-plate shear capacity of other cast-in-place anchors. Two versions of the MASA are available — the standard MASA for installation on standard forms and the MASAP for panelized forms.
Tools
Hammer
Fasteners
10d (0.148" x 3") Nail
8d Duplex (0.131" x 2 1/2") Nail
10d x 1 1/2" (0.148" x 1 1/2") Nail
Installation
1
8d Duplex or 10d Nails
8d Duplex ó 10d Clavos
2
3
4
5
Reduced loads apply, check with Designer.
Se aplican cargas reducidas; consulte al diseñador.
Blocking required attached to sill with A35Z (not shown) or per Designer.
Se debe adjuntar un bloqueo al larguero con A35Z (no se muestra) o según indicaciones del diseñador.
Reduced loads apply, check with Designer.
Se aplican cargas reducidas; consulte al diseñador.