Strong-Drive® SDWC Truss Screw
The Strong-Drive SDWC Truss screw provides a stud-to-bottom plate or stud-to-top plate connection as well as fastening trusses and rafters to top plates. The full-threaded shank engages the entire length of the fastener, providing a secure connection. The SDWC is tested in accordance with ICC-ES AC233 (screw) and AC13 (wall assembly and roof-to-wall assembly) for uplift and lateral loads between wall plates and vertical wall framing and between the top plate and the roof rafters or trusses. It is code listed under IAPMO-UES ER-262 and meets 2018 and 2021 IRC® and IBC® code requirements for several common wood framing applications.
Tools
Impact Driver
Quik Stik
Installation
1
2
3
4
5
Note: SDWC Truss screws can also be installed using the Quik Stik™ Rafter and Truss Fastening System.
Nota: Los tornillos para cerchas SDWC también se pueden instalar con el sistema de sujeción de vigas y cerchas Quik Stik™.
Additional Conditions
Fasten Straight Up Through Double Top Plate
Sujete directamente a través de la solera superior doble
Fasten from Front-Bottom Corner of Double Top Plate
Sujete desde la esquina inferior delantera de la solera superior doble
Fasten from Wide Face of Stud
Sujete desde la cara ancha del montante
Fasten from Narrow Face of Stud
Sujete desde la cara estrecha del montante
Rafter/Truss Gable End Installation
Instalación en extremo de hastial de viga/cercha
Installation with Quik Stik™
Instalación con Quik Stik
Stud-to-Bottom Plate Connection Over Concrete/Masonry Foundation
Conexión de montante a solera inferior sobre cimentación de concreto/mampostería
One Screw
Un tornillo
Two Screws
Dos tornillos
Three Screws
Tres Tornillos
Narrow Face of Stud-to-Bottom Plate
Cara estrecha de montante sobre solera inferior
Installation Angle Range
Rango de ángulo de instalación
Min. Edge Distance
Distancia mín. al borde