LSTHD/STHD Strap-Tie Holdown
The STHD is an embedded strap-tie holdown offering high load capacity and a staggered nail pattern to help minimize splitting. The STHD incorporates many features that aid correct installation and improve performance. When installed on the forms with the StrapMate® strap holder, the unique design of the STHD delivers enhanced stability before and during the pour to help prevent both parallel and perpendicular movement (relative to the form). This results in accurate positioning of the strap and reduced possibility of spalling.
Tools
Hammer
Fasteners
16d Sinker (0.162" x 3 1/4") Nail or 10d common (0.148" x 3")
Installation
1
STHD is anchored using StrapMate® (shown in orange)
Embedment line (top of concrete)
STHD está anclado usando StrapMate (se muestra en naranja)
Línea de empotramiento (parte superior del concreto)
2
Strap may be bent down and back up one time only.
La abrazadera se puede doblar hacia abajo y hacia arriba sólo una vez.