READ THIS BEFORE ACCESSING THE SOFTWARE PROGRAM. ACCESSING THE SOFTWARE PROGRAM INDICATES YOUR ACCEPTANCE OF THE FOLLOWING TERMS AND CONDITIONS. IF YOU DO NOT ACCEPT THESE TERMS YOU MUST RETURN THE ORIGINAL SOFTWARE PROGRAM AND RELATED DOCUMENTATION TO THE COMPANY AND DESTROY OR PERMANENTLY ERASE ALL COPIES OF THE SOFTWARE PROGRAM AND RELATED DOCUMENTATION.
PLEASE REFER TO THE COMPANY'S "ANCHORING AND FASTENING SYSTEMS FOR CONCRETE AND MASONRY" CATALOG FOR ALLOWABLE LOADS, CORRECT INSTALLATION PROCEDURES AND OTHER IMPORTANT INFORMATION ABOUT THE COMPANY'S PRODUCTS DEPICTED HEREIN, INCLUDING THE TERMS AND CONDITIONS OF SALE AND THE BUILDING CODE EVALUATION LISTINGS. TO OBTAIN THIS CATALOG, PLEASE CONTACT YOUR SIMPSON REPRESENTATIVE OR WRITE OR CALL THE COMPANY.
Simpson Strong-Tie ("Company") grants you a non-exclusive, non-transferable license to use this copy of the software program, consisting of the software program's executable file, its supporting files, drawings and accompanying documentation (hereinafter referred to collectively as "Program"), according to the terms of this license.
You are permitted to (1) use the Program for information purposes; (2) save a copy of Program to your computer harddrive or other media; (3) use the Program and the individual files contained therein for production and design purposes; and (4) redistribute unmodified copies of the Program, without charge, to individual users. "Production and design purposes" is herein defined as including only applications that involve the use or sale of Simpson Strong-Tie products.
You may NOT (1) modify, translate, reverse engineer, decompile, disassemble the Program including any of its files, drawings or documentation; (2) redistribute, rent or lease the Program for a fee or charge; (3) represent that the Program including any of its individual files, drawings or documentation are owned by any other party other than Company; (4) remove any proprietary notices, labels, marks or identifying information of any kind on the Program including its files, drawings and accompanying documentation.
Company retains all right, title, interest in and copyrights to the Program including its individual files, drawings and documentation and any backup copy made by you regardless of the form or media in or on which the original or other copies may subsequently exist. Unauthorized copying or use of the Program or any part thereof or failure to comply with the above restrictions will result in automatic termination of this license and will make available to Company other legal remedies. This license is not a sale of the original or any backup copy. When individual files are reproduced or their contents displayed you MUST include the legend "Copyright (c) 2003 Simpson Strong-Tie Co., Inc. All rights reserved."
COMPANY MAKES NO WARRANTY WITH RESPECT TO THE PROGRAM. THE PROGRAM IS DELIVERED "AS IS" AND WITH ALL FAULTS. COMPANY MAKES AND YOU RECEIVE NO WARRANTIES, EXPRESS, IMPLIED, STATUTORY OR ALLEGEDLY EXTENDED IN ANY COMMUNICATION WITH YOU. COMPANY SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. COMPANY DOES NOT WARRANT THAT THE OPERATION OF THE PROGRAM WILL BE ERROR FREE OR UNINTERRUPTED.
The above exclusions may not apply to you as some states do not allow the exclusion of implied warranties. In addition, you may also have other rights which vary from state to state.
THIS PROGRAM INCLUDING THE FILES AND DRAWINGS CONTAINED THEREIN ARE TOOLS INTENDED TO BE USED BY TRAINED PROFESSIONALS ONLY. THE DRAWINGS SET FORTH IN THE PROGRAM ARE INTENDED TO BE USED IN CONJUNCTION WITH COMPANY PRODUCTS ONLY. THE PROGRAM IS NOT A SUBSTITUTE FOR YOUR PROFESSIONAL JUDGMENT. THIS PROGRAM IS INTENDED TO ASSIST WITH DESIGN AND IS NOT A SUBSTITUTE FOR INDEPENDENT TESTING FOR STRESS, SAFETY, AND UTILITY. DUE TO THE LARGE VARIETY OF POTENTIAL APPLICATIONS FOR THE PRODUCTS ILLUSTRATED, COMPANY SHALL NOT BE LIABLE IN ANY MANNER WHATSOEVER FOR THE RESULTS OBTAINED THROUGH THE USE OF THE PROGRAM. PERSONS USING THE PROGRAM ARE RESPONSIBLE FOR THE SUPERVISION, MANAGEMENT, AND CONTROL OF THE PROGRAM. THIS RESPONSIBILITY INCLUDES, BUT IS NOT LIMITED TO, THE DETERMINATION OF APPROPRIATE USES FOR THE PROGRAM, FILES AND DRAWINGS AND THE SELECTION OF THE OTHER SOFTWARE AND MATERIALS TO ACHIEVE INTENDED RESULTS. PERSONS USING THE PROGRAM ARE ALSO RESPONSIBLE FOR ESTABLISHING THE ADEQUACY OF INDEPENENT PROCEDURES FOR TESTING THE RELIABILITY AND ACCURACY OF ANY OUTPUT, INCLUDING ALL ITEMS DESIGNED BY USING THE PROGRAM.
IN NO EVENT WILL COMPANY BE LIABLE FOR ANY DAMAGES, INCLUDING LOSS OF DATA OR INFORMATION OF ANY KIND, LOST PROFITS, COST OF COVER OR ANY OTHER SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES ARISING OUT OF THIS AGREEMENT OR THE USE OR INABILITY TO USE THE PROGRAM, HOWEVER CAUSED, AND ON ANY THEORY OF LIABILITY. THIS LIMITATION WILL APPLY EVEN IF COMPANY OR ANY DISTRIBUTOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. YOU ACKNOWLEDGE THAT THE ROYALTY FREE BASIS FOR RECEIVING THIS LICENSE REFLECTS THIS ALLOCATION OF RISK. IF YOU OBTAINED THIS LICENSE IN THE UNITED STATES, SOME STATES DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
The license provided herein is effective until terminated. You may terminate this license at any time by destroying the Program and the permitted backup copy. This license automatically terminates if you fail to comply with its terms and conditions. You agree that, upon such termination, you will destroy (or permanently erase) all copies of the Program. In addition, upon termination, you will return the original Program and documentation to Company, together with any other material you have received from Company in connection with the Program.
If this product is acquired under the terms of a government contract, use, duplication, and disclosure are subject to the terms of this license and the following restrictions: subdivision (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at 252.227-7013 (DOD contracts); subdivisions (a) through (d) of 52.227-19 (Civilian agency contract); and the applicable ADP Schedule Contract (GSA contract).
This Agreement shall be governed by the laws of the State of California, including its Uniform Commercial Code without reference to conflicts of laws principles. This Agreement is the entire agreement between the parties and supersedes any other communications or advertising with respect to the Program and accompanying documentation. If you have any questions, please contact in writing: Simpson Strong-Tie, Customer Service.