×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

H10S Hurricane Tie

Roof Truss and Rafter Connectors, Ties, and Straps

This product's information may differ depending on the category of use. You are currently viewing details related to Roof Truss and Rafter Connectors, Ties, and Straps. You can also view product information related to the categories of: Seismic and Hurricane Ties, Hurricane Ties for Masonry

The H10S is designed to hold a rafter or truss on both sides for high-uplift applications with wood, concrete or concrete masonry walls. The longer bottom strap extends down the wall for higher capacity. Installation is fast and easy, with the Simpson Strong-Tie® Titen HD® screw anchors providing higher capacity. These double-sided hurricane ties provide faster installation than using two single-sided straps.

Key Features

  • Provides a connection between the truss or rafter and the wall of the structure to resist wind and seismic forces
  • Provides high uplift and lateral capacity using Titen HD screw anchors
  • The embossments add stiffness in crucial areas for improved performance

Material

  • 43 mil (18 ga.)

Finish

  • Galvanized (G90)

Installation

  • Use all specified fasteners; see General Notes
  • Connectors attached using hex head 3/8"- diameter Titen HD screw anchors
  • Products shall be installed such that the Titen HD screw anchors are not exposed to the exterior environment
  • Attach to grouted concrete block with a minimum of one #5 rebar horizontal in the top lintel block
  • Hurricane ties do not replace solid blocking

Related Literature

Connectors for Cold-Formed Steel Construction Catalog
C-CF-2023
A catalog for Connectors for Cold-Formed Steel Construction products and solutions.
Catalog
Wood Construction Connectors 2024-2025
C-C-2024
A catalog including new product information as well as any applicable specification and installation instructions for wood-to-wood and wood-to-concrete structural connectors.
Catalog
Conectores para la construcción con madera 2021–2023
C-C-2021SP
El catálogo incluye información sobre nuevos productos, así como especificaciones e instrucciones de instalación aplicables para conectores estructurales de madera a madera y de madera a concreto.
Catalog
High Wind Guide
F-C-HWG23
A comprehensive guide to help designers select the most appropriate connections for high-wind regions.
Product Guide
Hurricane Tie Used for Truss Bearing Enhancement
T-C-HTIEBEAR24
A technical bulletin providing allowable downloads of hurricane ties when used for truss-bearing enhancement. Allowable loads for connectors and for the connectors and wood combined are also provided.
Technical Bulletin

Product Information Table

Fastener Production Information and Stuff & Things
Model No. Ga. W (in.) H (in.) Coating/Material Packaging Qty.
H10S 18 5 11 5/8 Zinc Galvanized, G90 1

Load Tables

  1. Min. f'm = 1,500 psi and f'c = 2,500 psi.
  2. The products shall be installed such that Titen HD® anchors are not exposed to the weather.
  3. See Fastening Systems for more information on Simpson Strong-Tie fasteners.

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT