LS Skewable L Angle
Roof Truss and Rafter Connectors, Ties, and Straps
This product's information may differ depending on the category of use. You are currently viewing details related to Roof Truss and Rafter Connectors, Ties, and Straps. You can also view product information related to the categories of: Reinforcing and Skewable Angles, Joist Framing Connectors for Cold-Formed Steel Construction, Rigid Connectors for Cold-Formed Steel Construction
Product Details
The LS connector is a cost-effective method for connecting roof rafters to hip rafters. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The LS has well-defined fastener locations, and testing ensures that the tabulated load values account for connection eccentricities.
Key Features
- The connectors are general utility-reinforcing angles with multiple uses
- Field-adjustable angles from 0° to 135° allow for attaching members intersecting at angles
- Perfect angle series for many household repairs and DIY projects
Material
- 43 mil (18 ga.)
Finish
- Galvanized or ZMAX®; some models available in stainless steel. See Corrosion Information
Installation
- Use all specified fasteners; see General Notes
- Field skewable; bend one time only
- CFS framing must be constrained against rotation when using a single LS per connection
Related Literature
Product Information Table
Model No. | Thickness (mil) | Ga. | L (in.) | Coating/Material | Packaging Qty. |
---|---|---|---|---|---|
LS30 | 43 | 18 | 3 3/8 | Zinc Galvanized, G90 | 1 |
LS30Z | 43 | 18 | 3 3/8 | ZMAX® | 1 |
LS50 | 43 | 18 | 4 7/8 | Zinc Galvanized, G90 | 1 |
LS50SS | 43 | 18 | 4 7/8 | Stainless Steel | 1 |
LS50Z | 43 | 18 | 4 7/8 | ZMAX® | 1 |
LS70 | 43 | 18 | 6 3/8 | Zinc Galvanized, G90 | 1 |
LS70Z | 43 | 18 | 6 3/8 | ZMAX® | 1 |
LS90 | 43 | 18 | 7 7/8 | Zinc Galvanized, G90 | 1 |
LS90Z | 43 | 18 | 7 7/8 | ZMAX® | 1 |
Load Tables
![LS Skewable Angles](https://www2.strongtie.com/graphics/cfs/tables/198-2020.png)
- Loads are for one part only.
- See Fastening Systems for more information on Simpson Strong-Tie fasteners.
![LS Skewable Angles](https://embed.widencdn.net/img/ssttoolbox/tximu3vtoi/497px@2x/Typical_Installation_Roof_Rafter_Hip_Rafter.png)
Code Reports & Compliance
Drawings
DWG | DXF | RFA | IFC | SAT | |||
---|---|---|---|---|---|---|---|