Opti-Mesh Adhesive-Anchoring Screen Tubes
Screen tubes are vital to the performance of adhesive anchors in base materials that are hollow or contain voids, such as hollow block and brick. The Simpson Strong-Tie® Opti-Mesh screen tube provides the economical advantage of a plastic screen tube while providing performance comparable to steel screen tubes and better than competitive plastic screen tubes.
Key Features
The Simpson Strong-Tie Opti-Mesh screen features formula-specific mesh designed to control the flow of adhesive out of the screen. The result is uniform coverage of adhesive on the rod. The standard screen utilizes mesh which allows adhesive to flow freely out of the screen when the rod is inserted. Too much adhesive is pushed out of the screen, leaving a large portion of the rod unbonded. This unbonded rod will pull out of the screen at a much lower load than a rod installed with an Opti-Mesh screen.Material
Plastic
Caution
Screen tubes are designed for a specific adhesive type. Epoxy screen tubes must be used with SET-XP®, ET-HP® or SET formulations, and acrylic adhesive screen tubes must be used with AT.
Related Links
Related Literature
-
Sistemas de anclaje y sujeción para concreto y mampostería 2016-2017C-A-2016SPEl catálogo C-A-2016SP de 340 páginas proporciona información detallada de anclajes Simpson Strong-Tie para concreto y mampostería, incluidos nuevos productos de anclaje adhesivo y anclaje mecánico.Catalog -
2016 - 2017 Product Guide - Anchoring and Fastening SystemsS-A-PG16The 2016 Product Guide for Anchor & Fastening Systems provides information on adhesive and mechanical anchors, as well as direct fastening, carbide and restoration products.Product Guide -
2016-2017 Guía de productos - Sistemas de anclaje y sujeciónS-A-PG16SPGuía de productos para sistemas de anclaje y sujeción S-A-PG16SP, con 236 páginas de información sobre anclajes mecánicos y adhesivos, y productos de sujeción directa, de carburo y de restauración.Flier -
Show 1 MoreShow Less
Product Information Tables
| For Rod Dia. (in.) | Hole Size (in.) | Length (in.) | Model No. | Carton Qty. |
|---|---|---|---|---|
| 3/8 | 9/16 | 3 1/2 | ETS373P | 150 |
| 6 | ETS376P | 150 | ||
| 10 | ETS3710P | 100 | ||
| 1/2 | 3/4 | 3 1/2 | ETS503P | 100 |
| 6 | ETS506P | 100 | ||
| 10 | ETS5010P | 50 | ||
| 5/8 | 7/8 | 3 1/2 | ETS623P | 50 |
| 6 | ETS626P | 50 | ||
| 10 | ETS6210P | 25 | ||
| 13 | ETS6213P | 25 | ||
| 3/4 | 1 | 8 | ETS758P | 25 |
| 13 | ETS7513P | 25 | ||
| 17 | ETS7517P | 25 | ||
| 21 | ETS7521P | 25 | ||
| Not for use with SET1.7KTA. | ||||
| For Rod Dia. (in.) | Hole Size (in.) | Length (in.) | Model No. | Carton Qty. |
|---|---|---|---|---|
| 3/8 | 9/16 | 3 1/2 | ATS373P | 150 |
| 6 | ATS376P | 150 | ||
| 10 | ATS3710P | 100 | ||
| 1/2 | 3/4 | 3 1/2 | ATS503P | 100 |
| 6 | ATS506P | 100 | ||
| 10 | ATS5010P | 50 | ||
| 5/8 | 7/8 | 3 1/2 | ATS623P | 50 |
| 6 | ATS626P | 50 | ||
| 10 | ATS6210P | 25 | ||
| 13 | ATS6213P | 25 | ||
| 3/4 | 1 | 8 | ATS758P | 25 |
| 13 | ATS7513P | 25 | ||
| 17 | ATS7517P | 25 | ||
| 21 | ATS7521P | 25 |