Steel Adhesive-Anchoring Screen Tubes
Product Details
Screen tubes are used in hollow base material applications to contain adhesive around the anchor and prevent it from running into voids. Simpson Strong-Tie® screen tubes are specifically designed to work with AT-XP® or ET-3G™ and SET-XP® adhesives in order to precisely control the amount of adhesive that passes through the mesh. This results in thorough coating and bonding of the rod to the screen tube and base material. Order screen tubes based upon rod diameter and adhesive type. The actual outside diameter of the screen tube is larger than the rod diameter.
Applications
- Screen tubes are for use in hollow CMU, hollow brick and unreinforced masonry applications
Material
- ATS screen tubes: 50 mesh stainless steel
- ETS screen tubes: 60 mesh carbon steel
Caution
Screen tubes are designed for a specific adhesive type. ETS screen tubes must be used with ET-3G or SET-XP formulations, and ATS screen tubes must be used with AT-XP.
Related Links
- Anchoring Systems Technical and Installation Notes
- Contact Simpson Strong-Tie for information about special-order sizes.
- Adhesive Cartridge Estimator
- Adhesive Anchor Installation Training
Catalog Pages
Related Literature
Product Information Table
| Model No. | Description | Rod Dia. (in.) | Hole Dia. (in.) | Outside Diameter (in.) | Length (in.) | Carton Qty. |
|---|---|---|---|---|---|---|
| ATS7513 | ATS stainless-steel screen tube for AT-XP | 3/4 | 1 | 31/32 | 13 | 25 |
| ATS7517 | ATS stainless-steel screen tube for AT-XP | 3/4 | 1 | 31/32 | 17 | 25 |
| ATS758 | ATS stainless-steel screen tube for AT-XP | 3/4 | 1 | 31/32 | 8 | 25 |
| ETS3710 | ETS carbon-steel screen tube for SET-XP and ET-3G | 3/8 | 9/16 | 15/32 | 10 | 100 |
| ETS376 | ETS carbon-steel screen tube for SET-XP and ET-3G | 3/8 | 9/16 | 15/32 | 6 | 150 |
| ETS5010 | ETS carbon-steel screen tube for SET-XP and ET-3G | 1/2 | 11/16 | 19/32 | 10 | 50 |
| ETS506 | ETS carbon-steel screen tube for SET-XP and ET-3G | 1/2 | 11/16 | 19/32 | 6 | 100 |
| ETS6210 | ETS carbon-steel screen tube for SET-XP and ET-3G | 5/8 | 7/8 | 25/32 | 10 | 25 |
| ETS6213 | ETS carbon-steel screen tube for SET-XP and ET-3G | 5/8 | 7/8 | 25/32 | 13 | 25 |
| ETS626 | ETS carbon-steel screen tube for SET-XP and ET-3G | 5/8 | 7/8 | 25/32 | 6 | 50 |
| ETS628 | ETS carbon-steel screen tube for SET-XP and ET-3G | 5/8 | 7/8 | 25/32 | 8 | - |
| ETS7513 | ETS carbon-steel screen tube for SET-XP and ET-3G | 3/4 | 1 | 31/32 | 13 | 25 |
| ETS7517 | ETS carbon-steel screen tube for SET-XP and ET-3G | 3/4 | 1 | 31/32 | 17 | 25 |
| ETS7521 | ETS carbon-steel screen tube for SET-XP and ET-3G | 3/4 | 1 | 31/32 | 21 | 25 |
| ETS758 | ETS carbon-steel screen tube for SET-XP and ET-3G | 3/4 | 1 | 31/32 | 8 | 25 |
Product Information Tables
| For Rod Dia. (in.) | Hole Size (in.) | Actual Screen Size O.D./Length (in.) | Model No. | Carton Qty. |
|---|---|---|---|---|
| 3/8 | 9/16 | 15/32 x 3 1/2 | ATS373 | 150 |
| 15/32 x 6 | ATS376 | 150 | ||
| 1/2 | 11/16 | 19/32 x 3 1/2 | ATS503 | 100 |
| 19/32 x 6 | ATS506 | 100 | ||
| 19/32 x 10 | ATS5010 | 50 | ||
| 5/8 | 7/8 | 25/32 x 3 | ATS623 | 50 |
| 25/32 x 6 | ATS626 | 50 | ||
| 25/32 x 10 | ATS6210 | 25 | ||
| 25/32 x 13 | ATS6213 | 25 | ||
| 3/4 | 1 | 31/32 x 8 | ATS758 | 25 |
| 31/32 x 13 | ATS7513 | 25 | ||
| 31/32 x 17 | ATS7517 | 25 |
| For Rod Dia. (in.) | Hole Size (in.) | Actual Screen Size O.D./Length (in.) | Model No. | Carton Qty. |
|---|---|---|---|---|
| 3/8 | 9/16 | 15/32 x 6 | ETS376 | 150 |
| 15/32 x 10 | ETS3710 | 100 | ||
| 1/2 | 11/16 | 19/32 x 6 | ETS506 | 100 |
| 19/32 x 10 | ETS5010 | 50 | ||
| 5/8 | 7/8 | 25/32 x 6 | ETS626 | 50 |
| 25/32 x 10 | ETS6210 | 25 | ||
| 25/32 x 13 | ETS6213 | 25 | ||
| 3/4 | 1 | 31/32 x 8 | ETS758 | 25 |
| 31/32 x 13 | ETS7513 | 25 | ||
| 31/32 x 17 | ETS7517 | 25 | ||
| 31/32 x 21 | ETS7521 | 25 | ||
| Note: Not for use with SET1.7KTA. | ||||
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
