text.skipToContent text.skipToNavigation

Product Information Tables

  1. These connectors are not load rated; may be installed with nails or bolts.
  2. Fasteners: Nail dimensions in the table are listed diameter by length. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

Load Table

    These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.

  1. 1212HL, 1616HL, 1212HT, and 1616HT are to be installed in pairs with bolts in double shear. A single part with bolts in single shear is not load rated.
  2. Allowable loads are based on a minimum member thickness of 3 1/2".
  3. 1212HT and 1616HT loads assume a continuous beam.
Typical T Installation
Typical L Installation

Code Reports

Part IAPMO UES ER ICC-ES ESR City of Los Angeles State of Florida
1212HL No evaluation report listing.
1212HT No evaluation report listing.
1212LNo evaluation report listing.
1212TNo evaluation report listing.
128TNo evaluation report listing.
1616HL No evaluation report listing.
1616HT No evaluation report listing.
55LNo evaluation report listing.
66LNo evaluation report listing.
66TNo evaluation report listing.
88LNo evaluation report listing.
LSee specific model numbers for code listings.
TSee specific model numbers for code listings.

Drawings

Part Orthographic Perspective
1212HLNone None
1212HT
1212HT Front View
DWG DXF
None
1212L
1212L Front View
DWG DXF
1212L Installed Perspective View
DWG DXF
1212T
1212T Front View
DWG DXF
1212T Installed Perspective View
DWG DXF
128TNone
1212T Installed Perspective View
DWG DXF
1616HLNone None
1616HTNone None
55LNone
1212L Installed Perspective View
DWG DXF
66L
66L Front View
DWG DXF
1212L Installed Perspective View
DWG DXF
66L Installed Perspective View
DWG DXF
66T
66T Front View
DWG DXF
1212T Installed Perspective View
DWG DXF
66T Installed Perspective View
DWG DXF
88L
88L Front View
DWG DXF
1212L Installed Perspective View
DWG DXF
LNone None
TNone None