Storm-Panel Screw
On This Page
Product Details
Key Features
- Save time and money with a single installation
- The screw is made of Type 302 stainless steel for corrosion resistance
Applications
- Ideal for attaching storm panels to wood, concrete and masonry
Product Includes
Each Pack Contains:
- (25) Stainless-steel storm-panel screws 1/4" x 3 7/16"
- (25) 1/4" zinc die-cast washered wing nuts
- (25) White plastic caps to protect threads after panels are removed
- (1) Hex-driver bit for panel screw
- (1) 0.234" x 4 1/2" carbide-tipped drill bit
Installation
- Drill a hole in the concrete or masonry base material using the drill bit provided. To predrill into wood, use a 3/16" bit (not included).
- Drive the screw using the hex-driver bit (included). Drive the screw to fully embed the coarse-threaded shank such that the threaded stud for the wing nut is fully exposed.
- To secure panels: install the panel on the threaded stud and secure with the wing nut.
- To remove panels: remove the wing nut, remove the panel, then cover the threaded stud with the plastic cap.
Related Links
Catalog Pages
Related Literature
Product Information Table
| Model No. | Coating/Material | Length (in.) | Shank Diameter (in.) | Packaging Qty. | UPC |
|---|---|---|---|---|---|
| SPS25344-KT | Type 302 Stainless Steel | 3 7/16 | 1/4 | 25 | 744039999507 |
Product Information Tables
| Model No. | Length (in.) | Shank Diameter (in.) | Coating/Material | UPC |
|---|---|---|---|---|
| SPS25344-KT | 3 7/16 | 1/4 | Type 302 Stainless Steel | 744039999507 |
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|