We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

text.skipToContent text.skipToNavigation

Strong-Drive® SDCP TIMBER-CP Screw 

Strong-Drive® SDCP TIMBER-CP Screw

On This Page

The Strong-Drive SDCP Timber-CP screw is a structural fastener available in a variety of lengths and is designed for cross-laminated timber (CLT) and mass timber construction, as well as general interior applications. These partially threaded, 0.315"- and 0.394"-diameter structural fasteners are designed to pull structural members together with superb holding power and excellent load capacity. The large, flat head and underhead nibs provide for clean countersinking, flush with the surface. Predrilling is not typically required. For interior and dry applications only.

Key Features

  • Flat-head with nibs help countersink the screw for a flush finish
  • Heavy-duty shank provides strength and durability
  • Head stamp includes length in mm for inspection
  • Yellow-zinc coating
  • Shank knurl aids in torque reduction
  • Deep 6-lobe recess for a secure drive (replacement bit: BIT40T-134 for SDCP22xxx; BIT50T-134 for SDCP27xxx)
  • Type-17 point for fast starts
  • Available in 3 1/8", 4 3/4", 5 1/2", 6 1/4", 7", 8 5/8", 9 1/2", 11", 11 3/4" and 14" lengths

Applications

  • CLT wall-to-wall, floor-to-floor, panel-to-beam, panel-to-wall, surface spline, lap joint and ledger connections, general timber framing

Product Includes

  • Retail and bulk packs include 6-lobe driver bits

Related Literature

Product Information Table

Fastener Production Information and Stuff & Things
New products
Model No. Coating/Material Length (in.) Head Diameter (in.) Shank Diameter (in.) Drive Type Head Type Thread Length Point Type Packaging Qty.
SDCP221100 Yellow-Zinc Coated 11 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 250
SDCP221100-R50 Yellow-Zinc Coated 11 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 50
SDCP221134 Yellow-Zinc Coated 11 3/4 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 250
SDCP221134-R50 Yellow-Zinc Coated 11 3/4 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 50
SDCP22318 Yellow-Zinc Coated 3 1/8 0.59 0.22 T40 6-Lobe Flat Head with Nibs 1.97 Type-17 Point 250
SDCP22318-R50 Yellow-Zinc Coated 3 1/8 0.59 0.22 T40 6-Lobe Flat Head with Nibs 1.97 Type-17 Point 50
SDCP22434 Yellow-Zinc Coated 4 3/4 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 250
SDCP22434-R50 Yellow-Zinc Coated 4 3/4 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 50
SDCP22512 Yellow-Zinc Coated 5 1/2 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 250
SDCP22512-R50 Yellow-Zinc Coated 5 1/2 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 50
SDCP22614 Yellow-Zinc Coated 6 1/4 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 250
SDCP22614-R50 Yellow-Zinc Coated 6 1/4 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 50
SDCP22700 Yellow-Zinc Coated 7 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 250
SDCP22700-R50 Yellow-Zinc Coated 7 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 50
SDCP22858 Yellow-Zinc Coated 8 5/8 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 250
SDCP22858-R50 Yellow-Zinc Coated 8 5/8 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 50
SDCP22912 Yellow-Zinc Coated 9 1/2 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 250
SDCP22912-R50 Yellow-Zinc Coated 9 1/2 0.59 0.22 T40 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 50
SDCP271400 Yellow-Zinc Coated 14 0.7 0.275 T50 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 150
SDCP271400-R25 Yellow-Zinc Coated 14 0.7 0.275 T50 6-Lobe Flat Head with Nibs 3.15 Type-17 Point 25

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT