This product's information may differ depending on the category of use. You are currently viewing details related to Strong-Drive® Interior Wood Screws. You can also view product information related to the category: Fasteners for the Quik Stik™ System
The Strong-Drive SDWC Truss screw provides a stud-to-bottom plate or stud-to-top plate connection as well as fastening trusses and rafters to top plates. The full-threaded shank engages the entire length of the fastener, providing a secure connection. The SDWC is tested in accordance with ICC-ES AC233 (screw) and AC13 (wall assembly and roof-to-wall assembly) for uplift and lateral loads between wall plates and vertical wall framing and between the top plate and the roof rafters or trusses. It is code listed under IAPMO-UES ER-262 and meets 2012 and 2015 IRC® and IBC® code requirements for several common framing applications.
SDWC15450-KT and SDWC15600-KT contain:
SDWC15450B-KT and SDWC15600B-KT contain:
|Model No.||Coating/Material||Length (in.)||Shank Diameter (in.)||Drive Type||Head Type||Thread Length||Point Type||Color||Packaging Qty.||UPC|
|SDWC15450-KT||E-coat® Electrocoating||4 1/2||0.152||T30 6-Lobe||Cap Head||4 1/4||Type-17 Point||Black||50||746056235507|
|SDWC15450B-KT||E-coat® Electrocoating||4 1/2||0.152||T30 6-Lobe||Cap Head||4 1/4||Type-17 Point||Black||500||707392902102|
|SDWC15600-KT||Clear Zinc Coating||6||0.152||T30 6-Lobe||Cap Head||5 3/4||Type-17 Point||Orange||50||746056548027|
|SDWC15600B-KT||Clear Zinc Coating||6||0.152||T30 6-Lobe||Cap Head||5 3/4||Type-17 Point||Orange||500||707392888307|
|Model No.||Length (in.)||Drive Type||Head Type||Thread Length||Shank Diameter (in.)||Point Type||Coating/Material||Color||Packaging Quantity||UPC|
|SDWC15450B-KT||4 1/2||T-30 6-Lobe||Cap Head||4 1/4||0.152||Type-17 Point||E-Coat™ Electrocoating||Black||500||707392902102|
|SDWC15450-KT||4 1/2||T-30 6-Lobe||Cap Head||4 1/4||0.152||Type-17 Point||E-Coat™ Electrocoating||Black||50||746056235507|
|SDWC15600B-KT||6||T-30 6-Lobe||Cap Head||5 3/4||0.152||Type-17 Point||Clear-Zinc Coating||Orange||500||707392888307|
|SDWC15600-KT||6||T-30 6-Lobe||Cap Head||5 3/4||0.152||Type-17 Point||Clear-Zinc Coating||Orange||50||746056548027|
Allowable loads for the SDWC Truss screws when installed from the underside of the top plate and from the face of the rafter/truss using a two-screw configuration per the detail configurations shown on the next page.
The Strong-Drive SDWC Truss screw provides an easy-to-install, high-capacity solution for stud-to-bottom plate or stud-to-top plate(s) connections. This table provides additional allowable load information for the SDWC screws when installed through the narrow face of the stud. The allowable loads are for SDWC screws installed per the details shown installed per the details shown.
See additional Load Tables, Technical Data and Installation Instructions for the Strong-Drive® SDWC Truss screw