We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

text.skipToContent text.skipToNavigation

BA Beam Hanger

BA

On This Page

Top-Flange Hangers for Solid Sawn Lumber

This product's information may differ depending on the category of use. You are currently viewing details related to Top-Flange Hangers for Solid Sawn Lumber. You can also view product information related to the category: Top-Flange Hangers for Engineered Wood

The BA is designed for engineered wood and solid sawn lumber applications. This top-flange hanger can carry medium loads with solid sawn lumber and higher loads with engineered wood products. The BA features minimum nailing with positive-angle nailing (PAN) to target moderate load conditions and maximum nailing to support higher loads.

Key Features

  • Cost-effective one-piece design compared to welded hangers
  • A full-height joist flange that captures the top chord of the joist to prevent rotation and eliminate the need for web stiffeners
  • Available for special order to accommodate sloped and/or skewed members

Material

  • 14 gauge or 12 gauge

Finish

  • Galvanized. May be ordered hot-dip galvanized; specify HDG.

Installation

  • Use all specified fasteners; see General Notes and nailer table.
  • May be used for weld-on applications. The minimum size weld is a 2"-long fillet weld to each side of each top flange; weld size to match hanger material thickness. Distribute the weld equally on both top flanges. Welding eliminates the top and face nailing requirements. Consult the code for special considerations when welding galvanized steel. The area should be well-ventilated; see General Instructions for the Installer, note k for weld information. Weld-on applications produce the maximum allowable download listed. For additional load information, refer to technical bulletin Top-Flange Hanger Reductions for Multiple-Ply Headers (T-C-WELDUPLFT).
  • BA min. nailing does not require web stiffeners. BA max. nailing requires the use of web stiffeners.
  • Ledgers must be evaluated for each application separately. Check TF dimension, nail length and nail location on ledger.
  • Refer to technical bulletin Sloped Joist in Non-Sloped Hangers (T-C-SLOPEJST) for information regarding load reductions on selected hangers which can be used without modification to support joists which have shallow slopes (≤ 3/4:12).
  • Bevel-cut the carried member for skewed applications.

Options

  • Other widths are available; specify W dimension (the minimum W dimension is 1 9/16").
  • The coating on special BA hangers will depend on the manufacturing process used. Check with your Simpson Strong-Tie representative for details. Hot-dip galvanization available: specify HDG.
  • For modified hangers, fastener quantity listed in tables may need to increase depending on joist size, skew and slope. All modified hangers are 12 ga.
  • Hangers may be modified for slopes and/or skews up to 45º. The top flanges may be sloped as much as 35º and may be open or closed up to 30º. See Modifications and Associated Load Reductions below.

Related Literature

Wood Construction Connectors 2021-2023
C-C-2021
A catalog including new product information as well as any applicable specification and installation instructions for wood-to-wood and wood-to-concrete structural connectors.
Catalog
Conectores para la construcción con madera 2021–2023
C-C-2021SP
El catálogo incluye información sobre nuevos productos, así como especificaciones e instrucciones de instalación aplicables para conectores estructurales de madera a madera y de madera a concreto.
Catalog
Allowable Loads for Joist Hangers with Gaps
T-C-HANGERGAP22
A technical bulletin explaining how allowable loads for joist and truss hangers are affected by gaps between the end of the carried member and the face of the carrying member.
Technical Bulletin
Allowable Loads for Top-Flange Joist Hangers Installed on Nailers
T-C-NAILUPLFT22
A technical bulletin including allowable loads and installation information for many common top-flange joist hangers installed on wood nailers.
Technical Bulletin
Sloped Joist in Non-Sloped Hangers
T-C-SLOPEJST22
A technical bulletin discussing the performance of non-sloped hangers used to support a sloped joist. The piece includes reduction factors for BA, ITS, HU and welded-series hangers.
Technical Bulletin
Top-Flange Hanger Reductions for Multiple-Ply Headers
T-C-MPLYHEADR22
A technical bulletin discussing reduction factors for top-flange hangers installed on multi-ply headers.
Technical Bulletin
Top-Flange Hangers Welded to Structural Steel Members
T-C-WELDUPLFT22
A technical bulletin describing the welding requirements and restrictions for attaching Simpson Strong-Tie top-flange hangers to structural steel members.
Technical Bulletin
Top-Flange Joist Hangers Installed on Walls over Wood Structural Panel Sheathing or Drywall
T-C-TFWALL22
A technical bulletin providing allowable loads for top-flange joist hangers installed on walls, either over wood structural panel sheathing or over gypsum board.
Technical Bulletin
Connector Selection Guide for Residential Construction — for Use with ALLJoist
CSG-AJSUS21
A 12-page guide that lists popular options for Simpson Strong-Tie hangers used with engineered wood products manufactured by ‌AllJoist.
Connector Selection Guide
Connector Selection Guide for Residential Construction — for Use with Boise Cascade
CSG-BCUS21
A 12-page guide that lists popular options for Simpson Strong-Tie hangers used with engineered wood products manufactured by Boise Cascade.
Connector Selection Guide
Connector Selection Guide for Residential Construction — for Use with LP Building Solutions
CSG-LPUS21
A 12-page guide that lists popular options for Simpson Strong-Tie hangers used with engineered wood products manufactured by ‌LP Building Solutions.
Connector Selection Guide
Connector Selection Guide for Residential Construction — for Use with Nordic Structures
CSG-NIUS21
A 12-page guide that lists popular options for Simpson Strong-Tie hangers used with engineered wood products manufactured by ‌Nordic Structures.
Connector Selection Guide
Connector Selection Guide for Residential Construction — for Use with Pacific Woodtech
CSG-PWTUS21
A 12-page guide that lists popular options for Simpson Strong-Tie hangers used with engineered wood products manufactured by ‌Pacific Woodtech.
Connector Selection Guide
Connector Selection Guide for Residential Construction — for Use with PinkWood
CSG-PWUS21
A 10-page guide that lists popular options for Simpson Strong-Tie hangers used with engineered wood products manufactured by ‌Pinkwood.
Connector Selection Guide
Connector Selection Guide for Residential Construction — for Use with Roseburg
CSG-RFPUS21
A 12-page guide that lists popular options for Simpson Strong-Tie hangers used with engineered wood products manufactured by ‌Roseburg.
Connector Selection Guide
Connector Selection Guide for Residential Construction — for Use with TrusJoist
CSG-TJUS22
A 12-page guide that lists popular options for Simpson Strong-Tie hangers used with TrusJoist.
Connector Selection Guide
Connector Selection Guide for Residential Construction — for Use with ALLJoist (Limit States Design)
CSG-AJSCAN21
A 12-page Canadian guide that lists popular options for Simpson Strong-Tie hangers used with engineered wood products manufactured by AllJoist.
Connector Selection Guide
Connector Selection Guide for Residential Construction — for Use with Boise Cascade (Limit States Design)
CSG-BCCAN21
A 12-page Canadian guide that lists popular options for Simpson Strong-Tie hangers used with engineered wood products manufactured by Boise Cascade.
Connector Selection Guide
Connector Selection Guide for Residential Construction — for Use with LP Building Solutions (Limit States Design)
CSG-LPCAN21
A 12-page Canadian guide that lists popular options for Simpson Strong-Tie hangers used with engineered wood products manufactured by LP Building Solutions.
Connector Selection Guide
Connector Selection Guide for Residential Construction — for Use with Nordic Structures (Limit States Design)
CSG-NICAN21
A 12-page Canadian guide that lists popular options for Simpson Strong-Tie hangers used with engineered wood products manufactured by Nordic Structures.
Connector Selection Guide
Connector Selection Guide for Residential Construction — for Use with Pinkwood (Limit States Design)
CSG-PWCAN21
A 10-page Canadian guide that lists popular options for Simpson Strong-Tie hangers used with engineered wood products manufactured by Pinkwood.
Connector Selection Guide
Connector Selection Guide for Residential Construction — for Use with Roseburg (Limit States Design)
CSG-RFPCAN21
A 12-page Canadian guide that lists popular options for Simpson Strong-Tie hangers used with engineered wood products manufactured by Roseburg.
Connector Selection Guide
Connector Selection Guide for Residential Construction — for Use with TrusJoist (Limit States Design)
CSG-TJCAN22
A 12-page guide that lists popular options for Simpson Strong-Tie hangers used with TrusJoist.
Connector Selection Guide
Guide de Selection de Connecteurs pour Utilisation avec les Produits Fabriques par ALLJoist.
CSG-AJSCAN21CF
Un guide canadien de 12 pages qui répertorie les options populaires pour l’utilisation des étriers Simpson Strong-Tie avec les produits en bois d’ingénierie fabriques par ALLJOIST®.
Connector Selection Guide
Guide de Selection de Connecteurs pour Utilisation avec les Produits Fabriques par Boise Cascade
CSG-BCCAN21CF
Un guide canadien de 12 pages qui répertorie les options populaires pour l’utilisation des étriers Simpson Strong-Tie avec les produits en bois d’ingénierie fabriques par Boise Cascade.
Connector Selection Guide
Guide de Selection de Connecteurs pour Utilisation avec les Produits Fabriques par LP Solutions de Bâtiment
CSG-LPCAN21CF
Un guide canadien de 12 pages qui répertorie les options populaires pour l’utilisation des étriers Simpson Strong-tie avec les produits en bois d’ingénierie fabriques par LP Building Solutions.
Connector Selection Guide
Guide de Selection de Connecteurs pour Utilisation avec les Produits Fabriques par Nordic Structures
CSG-NICAN21CF
Un guide canadien de 12 pages qui répertorie les options populaires pour l’utilisation des étriers Simpson Strong-Tie avec les produits en bois d’ingénierie fabriques par Nordic Structures.
Connector Selection Guide
Guide de Selection de Connecteurs pour Utilisation avec les Produits Fabriques par Pinkwood
CSG-PWCAN21CF
Un guide canadien de 10 pages qui répertorie les options populaires pour l’utilisation des étriers Simpson Strong-Tie avec les produits en bois d’ingénierie fabriques par Pinkwood.
Connector Selection Guide
Guide de Selection de Connecteurs pour Utilisation avec les Produits Fabriques par Roseburg
CSG-RFPCAN21CF
Un guide canadien de 12 pages qui répertorie les options populaires pour l’utilisation des étriers Simpson Strong-Tie avec les produits en bois d’ingénierie fabriques par Roseburg.
Connector Selection Guide
Guide de Selection de Connecteurs pour Utilisation avec les Produits Fabriques par TrusJoist
CSG-TJCAN22CF
Un guide canadien de 12 pages qui repertorie les options populaires pour l’utilisation des étriers Simpson Strong-Tie avec les produits en bois d’ingénierie fabriques par TrusJoist.
Connector Selection Guide
Engineered Wood/SCL Connector Guide
WC-C-EWPBI19
A bilingual (English-Spanish) wall chart featuring product and installation illustrations of top-selling EWP/SCL connectors.

Product Information Table

Fastener Production Information and Stuff & Things
New products
Model No. Joist Size Ga. W (in.) H (in.) B (in.) TF (in.) Coating/Material Packaging Qty.
BA1.56/11.88 1-1/2 in. x 11-7/8 in. 12 1 9/16 11 7/8 3 2 1/2 Zinc Galvanized, G90 1
BA1.56/14 1-1/2 in. x 14 in. 12 1 9/16 14 3 2 1/2 Zinc Galvanized, G90 1
BA1.56/9.5 1-1/2 in. x 9-1/2 in. 12 1 9/16 9 1/2 3 2 1/2 Zinc Galvanized, G90 1
BA1.81/11.25 1-3/4 in. x 11-1/4 in. 12 1 13/16 11 1/4 3 2 1/2 Zinc Galvanized, G90 1
BA1.81/11.88 1-3/4 in. x 11-7/8 in. 14 1 13/16 11 7/8 3 2 1/2 Zinc Galvanized, G90 1
BA1.81/14 1-3/4 in. x 14 in. 14 1 13/16 14 3 2 1/2 Zinc Galvanized, G90 1
BA1.81/16 1-3/4 in. x 16 in. 14 1 13/16 16 3 2 1/2 Zinc Galvanized, G90 1
BA1.81/7.25 1-3/4 in. x 7-1/4 in. 14 1 13/16 7 1/4 3 2 1/2 Zinc Galvanized, G90 1
BA1.81/9.25 1-3/4 in. x 9-1/4 in. 12 1 13/16 9 1/4 3 2 1/2 Zinc Galvanized, G90 1
BA1.81/9.5 1-3/4 in. x 9-1/2 in. 14 1 13/16 9 1/2 3 2 1/2 Zinc Galvanized, G90 1
BA2.1/11.88 2 in. x 11-7/8 in. 14 2 1/8 11 7/8 3 2 1/2 Zinc Galvanized, G90 1
BA2.1/14 2 in. x 14 in. 12 2 1/8 14 3 2 1/2 Zinc Galvanized, G90 1
BA2.1/16 2 in. x 16 in. 12 2 1/8 16 3 2 1/2 Zinc Galvanized, G90 1
BA2.1/9.5 2 in. x 9-1/2 in. 12 2 1/8 9 1/2 3 2 1/2 Zinc Galvanized, G90 1
BA2.37/11.88 2-5/16 in. x 11-7/8 in. 14 2 3/8 11 7/8 3 2 1/2 Zinc Galvanized, G90 1
BA2.37/14 2-5/16 in. x 14 in. 14 2 3/8 14 3 2 1/2 Zinc Galvanized, G90 1
BA2.37/16 2-5/16 in. x 16 in. 14 2 3/8 16 3 2 1/2 Zinc Galvanized, G90 1
BA2.37/18 2-5/16 in. x 18 in. 12 2 3/8 18 3 2 1/2 Zinc Galvanized, G90 1
BA2.37/20 2-5/16 in. x 20 in. 12 2 3/8 20 3 2 1/2 Zinc Galvanized, G90 1
BA2.37/9.5 2-5/16 in. x 9-1/2 in. 12 2 3/8 9 1/2 3 2 1/2 Zinc Galvanized, G90 1
BA2.56/11.88 2-1/2 in. x 11-7/8 in. 14 2 9/16 11 7/8 3 2 1/2 Zinc Galvanized, G90 1
BA2.56/14 2-1/2 in. x 14 in. 14 2 9/16 14 3 2 1/2 Zinc Galvanized, G90 1
BA2.56/16 2-1/2 in. x 16 in. 14 2 9/16 16 3 2 1/2 Zinc Galvanized, G90 1
BA2.56/18 2-1/2 in. x 18 in. 12 2 9/16 18 3 2 1/2 Zinc Galvanized, G90 1
BA2.56/20 2-1/2 in. x 20 in. 12 2 9/16 20 3 2 1/2 Zinc Galvanized, G90 1
BA2.56/22 2-1/2 in. x 22 in. 12 2 9/16 22 3 2 1/2 Zinc Galvanized, G90 1
BA2.56/24 2-1/2 in. x 24 in. 12 2 9/16 24 3 2 1/2 Zinc Galvanized, G90 1
BA2.56/26 2-1/2 in. x 26 in. 12 2 9/16 26 3 2 1/2 Zinc Galvanized, G90 1
BA2.56/28 2-1/2 in. x 28 in. 12 2 9/16 28 3 2 1/2 Zinc Galvanized, G90 1
BA2.56/30 2-1/2 in. x 30 in. 12 2 9/16 30 3 2 1/2 Zinc Galvanized, G90 1
BA2.56/9.5 2-1/2 in. x 9-1/2 in. 14 2 9/16 9 1/2 3 2 1/2 Zinc Galvanized, G90 1
BA210 2x10 12 1 9/16 9 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA210-2 Double 2x10 12 3 1/8 9 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA212 2x12 12 1 9/16 11 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA212-2 Double 2x12 12 3 1/8 11 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA214 2x14 12 1 9/16 13 1/16 3 2 1/2 Zinc Galvanized, G90 1
BA216 2x16 12 1 9/16 15 3 2 1/2 Zinc Galvanized, G90 1
BA28 2x8 12 1 9/16 7 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA28-2 Double 2x8 12 3 1/8 7 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA3.56/11.25 3-1/2 in. x 11-1/4 in. 12 3 9/16 11 1/4 3 2 1/2 Zinc Galvanized, G90 1
BA3.56/11.88 3-1/2 in. x 11-7/8 in. 14 3 9/16 11 7/8 3 2 1/2 Zinc Galvanized, G90 1
BA3.56/14 3-1/2 in. x 14 in. 14 3 9/16 14 3 2 1/2 Zinc Galvanized, G90 1
BA3.56/16 3-1/2 in. x 16 in. 14 3 9/16 16 3 2 1/2 Zinc Galvanized, G90 1
BA3.56/18 3-1/2 in. x 18 in. 14 3 9/16 18 3 2 1/2 Zinc Galvanized, G90 1
BA3.56/20 3-1/2 in. x 20 in. 12 3 9/16 20 3 2 1/2 Zinc Galvanized, G90 1
BA3.56/22 3-1/2 in. x 22 in. 12 3 9/16 22 3 2 1/2 Zinc Galvanized, G90 1
BA3.56/24 3-1/2 in. x 24 in. 12 3 9/16 24 3 2 1/2 Zinc Galvanized, G90 1
BA3.56/26 3-1/2 in. x 26 in. 12 3 9/16 26 3 2 1/2 Zinc Galvanized, G90 1
BA3.56/28 3-1/2 in. x 28 in. 12 3 9/16 28 3 2 1/2 Zinc Galvanized, G90 1
BA3.56/30 3-1/2 in. x 30 in. 12 3 9/16 30 3 2 1/2 Zinc Galvanized, G90 1
BA3.56/7.25 3-1/2 in. x 7-1/4 in. 12 3 9/16 7 1/4 3 2 1/2 Zinc Galvanized, G90 1
BA3.56/9.25 3-1/2 in. x 9-1/4 in. 12 3 9/16 9 1/4 3 2 1/2 Zinc Galvanized, G90 1
BA3.56/9.5 3-1/2 in. x 9-1/2 in. 14 3 9/16 9 1/2 3 2 1/2 Zinc Galvanized, G90 1
BA310 3x10 12 2 9/16 9 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA312 3x12 12 2 9/16 11 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA314 3x14 12 2 9/16 13 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA316 3x16 12 2 9/16 15 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA38 3x8 12 2 9/16 7 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA4.12/11.88 Double 2 in. x 11-7/8 in. 12 4 1/8 11 7/8 3 2 1/2 Zinc Galvanized, G90 1
BA4.12/14 Double 2 in. x 14 in. 12 4 1/8 14 3 2 1/2 Zinc Galvanized, G90 1
BA4.12/16 Double 2 in. x 16 in. 12 4 1/8 16 3 2 1/2 Zinc Galvanized, G90 1
BA4.12/9.5 Double 2 in. x 9-1/2 in. 12 4 1/8 9 1/2 3 2 1/2 Zinc Galvanized, G90 1
BA4.28/11.88 Double 2-1/4 in. x 11-7/8 in. 12 4 9/32 11 7/8 3 2 1/2 Zinc Galvanized, G90 1
BA4.28/14 Double 2-1/4 in. x 14 in. 12 4 9/32 14 3 2 1/2 Zinc Galvanized, G90 1
BA4.28/16 Double 2-1/4 in. x 16 in. 12 4 9/32 16 3 2 1/2 Zinc Galvanized, G90 1
BA4.28/9.5 Double 2-1/4 in. x 9-1/2 in. 12 4 9/32 9 1/2 3 2 1/2 Zinc Galvanized, G90 1
BA4.75/11.88 Double 2-5/16 in. x 11-7/8 in. 12 4 3/4 11 7/8 3 2 1/2 Zinc Galvanized, G90 1
BA4.75/14 Double 2-5/16 in. x 14 in. 12 4 3/4 14 3 2 1/2 Zinc Galvanized, G90 1
BA4.75/16 Double 2-5/16 in. x 16 in. 12 4 3/4 16 3 2 1/2 Zinc Galvanized, G90 1
BA4.75/18 Double 2-5/16 in. x 18 in. 12 4 3/4 18 3 2 1/2 Zinc Galvanized, G90 1
BA4.75/20 Double 2-5/16 in. x 20 in. 12 4 3/4 18 3 2 1/2 Zinc Galvanized, G90 1
BA4.75/9.5 Double 2-5/16 in. x 9-1/2 in. 12 4 3/4 9 1/2 3 2 1/2 Zinc Galvanized, G90 1
BA410 4x10 14 3 9/16 9 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA412 4x12 14 3 9/16 11 3 2 1/2 Zinc Galvanized, G90 1
BA414 4x14 12 3 9/16 13 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA416 4x16 12 3 9/16 15 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA48 4x8 14 3 9/16 7 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA5.12/11.88 Double 2-1/2 in. x 11-7/8 in. 12 5 1/8 11 7/8 3 2 1/2 Zinc Galvanized, G90 1
BA5.12/14 Double 2-1/2 in. x 14 in. 12 5 1/8 14 3 2 1/2 Zinc Galvanized, G90 1
BA5.12/16 Double 2-1/2 in. x 16 in. 12 5 1/8 16 3 2 1/2 Zinc Galvanized, G90 1
BA5.12/18 Double 2-1/2 in. x 18 in. 12 5 1/8 18 3 2 1/2 Zinc Galvanized, G90 1
BA5.12/20 Double 2-1/2 in. x 20 in. 12 5 1/8 20 3 2 1/2 Zinc Galvanized, G90 1
BA5.12/22 Double 2-1/2 in. x 22 in. 12 5 1/8 22 3 2 1/2 Zinc Galvanized, G90 1
BA5.12/24 Double 2-1/2 in. x 24 in. 12 5 1/8 24 3 2 1/2 Zinc Galvanized, G90 1
BA5.12/26 Double 2-1/2 in. x 26 in. 12 5 1/8 26 3 2 1/2 Zinc Galvanized, G90 1
BA5.12/28 Double 2-1/2 in. x 28 in. 12 5 1/8 28 3 2 1/2 Zinc Galvanized, G90 1
BA5.12/9.5 Double 2-1/2 in. x 9-1/2 in. 12 5 1/8 9 1/2 3 2 1/2 Zinc Galvanized, G90 1
BA610 6x10 12 5 1/2 9 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA612 6x12 12 5 1/2 11 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA614 6x14 12 5 1/2 13 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA616 6x16 12 5 1/2 15 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA68 6x8 12 5 1/2 7 1/8 3 2 1/2 Zinc Galvanized, G90 1
BA7.12/11.88 Double 3-1/2 in. x 11-7/8 in. 12 7 1/8 11 7/8 3 2 1/2 Zinc Galvanized, G90 1
BA7.12/14 Double 3-1/2 in. x 14 in. 12 7 1/8 14 3 2 1/2 Zinc Galvanized, G90 1
BA7.12/16 Double 3-1/2 in. x 16 in. 12 7 1/8 16 3 2 1/2 Zinc Galvanized, G90 1
BA7.12/18 Double 3-1/2 in. x 18 in. 12 7 1/8 18 3 2 1/2 Zinc Galvanized, G90 1
BA7.12/20 Double 3-1/2 in. x 20 in. 12 7 1/8 20 3 2 1/2 Zinc Galvanized, G90 1
BA7.12/22 Double 3-1/2 in. x 22 in. 12 7 1/8 22 3 2 1/2 Zinc Galvanized, G90 1
BA7.12/24 Double 3-1/2 in. x 24 in. 12 7 1/8 24 3 2 1/2 Zinc Galvanized, G90 1
BA7.12/26 Double 3-1/2 in. x 26 in. 12 7 1/8 26 3 2 1/2 Zinc Galvanized, G90 1
BA7.12/28 Double 3-1/2 in. x 28 in. 12 7 1/8 28 3 2 1/2 Zinc Galvanized, G90 1
BA7.12/9.5 Double 3-1/2 in. x 9-1/2 in. 12 7 1/8 9 1/2 3 2 1/2 Zinc Galvanized, G90 1

Load Tables

See Top-Flange Hanger Tables.
See Hanger Options for hanger modifications, which may result in reduced loads.

Various Header Applications

BA Top-Flange Hangers Various Header Applications
  1. Uplift loads have been increased for earthquake or wind loading with no further increase allowed. Reduce where other loads govern.
  2. Uplift loads are based on DF/SP lumber. For SPF/HF, use 0.86 x DF/SP uplift load.
  3. Where noted for single-ply joist hangers, use (6) 0.148" x 1 1/2" nails.
  4. Fasteners: Nail dimensions in the table are listed diameter by length. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

Nailer Table

BA Nailer Table
  1. Uplift values are for DF/SP nailers only.
  2. See technical bulletin T-C-NAILUPLFT for SPF/HF loads and increased uplift loads with alternative nailing.
  3. Attachment of nailer to supporting member is by the designer.
  4. Fasteners: Nail dimensions in the table are listed diameter by length. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

Modifications and Associated Load Reductions

BA Modifications and Associated Load Reductions
  1. Reduction factors are not cumulative. Use the lowest factors that apply.
  2. For straight-line interpolation, “a” is the specified angle.
  3. The sloped top flange option is permitted for BA hangers with a minimum height of 11 1/4" when the load reduction factor is applied to the tabulated BA allowable loads for the minimum installation.
Reduction Factor Instructions

Allowable Download = Lower of (Seat or Top Flange) x (Table Load)
Allowable Uplift
  = 0.90 x (Table Load) for BA with W < 2 1/2"
  = 1.00 x (Table Load) for all others

 

Low Side Flush
Center Flush
High Side Flush
Sloped down and skewed left with sloped top flange installation.
When ordering, specify low side flush, center flush or high side flush.

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT

Related Products