WSWH-BS Strong-Wall® High-Strength Wood Shearwall Anchor Bolt Stabilizers
Product Details
The WSWH-BS high-strength wood shearwall anchor bolt stabilizer is compatible only with WSWH panels.
The WSWH-BS anchor bolt stabilizer helps eliminate movement of anchor bolts during concrete placement. The stabilizer is compatible with all high-strength wood shearwall anchor bolt template (WSWH-RT) models. Stabilizers work in pairs and are used with each Strong-Wall anchor assembly, one at the embedded plate washer and the other above the templates.
Key Features
- Stabilizes anchor bolts and helps prevent movement during concrete placement
- Holes to accommodate 1/2"-diameter dowels (not supplied) for stabilization
- Works with all WSWH-RT high-strength wood shearwall anchor bolt templates
Applications
- Works with all models of reusable Strong-Wall® WSWH-RT high-strength wood shearwall anchor bolt templates
Material
- 14 gauge
Finish
- G90 galvanized
Installation
- Use WSWH-BS anchor bolt stabilizers in pairs.
- Install one bolt stabilizer at embedded plate washers and secure with upper nut of the nut/plate washer assembly.
- Install second bolt stabilizer at the top of the template and secure with nuts supplied with the anchor bolts.
- Drive 1/2"- dowels through the holes in the bolt stabilizers and into the ground. The 1/2"- dowels are removed immediately after concrete placement, prior to consolidation.
Related Links
Catalog Pages
Product Information Table
Model No. | Wall Model | Ga. | Coating/Material | Packaging Qty. |
---|---|---|---|---|
WSWH-BS12 | WSWH12 (12 1/8" width) | 14 | Zinc Galvanized, G90 | 1 |
WSWH-BS18 | WSWH18 (18" width) | 14 | Zinc Galvanized, G90 | 1 |
WSWH-BS24 | WSWH24 (24" width) | 14 | Zinc Galvanized, G90 | 1 |
Code Reports & Compliance
Drawings
DWG | DXF | RFA | IFC | SAT | |||
---|---|---|---|---|---|---|---|