Cold-Formed Steel: Special Order: Custom Clips and Connectors

Simpson Strong-Tie can make a variety of flat and bent steel clips and connectors for cold-formed steel framing. Most custom clips can be punched with different holes and slots.

Material: 229 mil (3 ga) maximum, 43 mil (18 ga) minimum mill-certified steel (carbon and type 316L stainless steel)

Finish: Galvanized, Simpson Strong-Tie^® gray paint. Contact Simpson Strong-Tie for availability.

To Obtain A Quote:

Supply a CAD drawing in .dwg or .dxf format complete with all dimensions, hole diameter and centerline locations, bend angles, steel strength (min. Fy and Fu), thickness (mils and/or ga.) and finish: (galvanized to G90, G185) or Simpson Strong-Tie gray paint (specify).
Total shape and size up to a maximum of 48" x 48" (approx. 1/16" tolerance).
Simpson Strong-Tie does not provide product engineering or load values for special order custom clips and connectors.
Contact Simpson Strong-Tie for pricing information
Refer to Important Information & General Notes for additional information.

Specification Example:

QUANTITY: XX pieces

DIMENSIONS: Per the attached CAD drawing (.dwg or .dxf format)

Drawing must be fully dimensioned including:

Overall dimensions
Leg dimensions
Bend Angles (if required)
Hole sizes and centerlines (if required)
MATERIAL SPECIFICATION: (Contact Simpson Strong-Tie for availability)

THICKNESS: 54 mil (16 ga.)

STRENGTH: Min. Yield Strength (Fy) = 33 ksi, Min. Tensile Strength (Fu) = 45 ksi

FINISH: Galvanized G90