THAR/L422 Skewed Truss Hangers

www.strongtie.com

>>Home > All Products - Alphabetical List

Designed for 4x2 floor trusses and 4x beams, the THAR/L422 has a standard skew of 45°. Straps must be bent for top flange installation. PAN nailing helps eliminate splitting of 4x2 truss bottom chords.

Material: 16 gauge.

Finish: Galvanized.

Installation:

Use all specified fasteners. See General Notes.
Straps must be field-formed over the header a minimum of 2 1/2".
Minimum and maximum nailing configurations available – see table for nailing requirements.

top Gallery:

roll over images below to see larger image


THAL422		Typical THAL422 Installation with Minimum Nailing on a Floor Truss with Double 4x2 Top Chord

top Load Table:See code report listings below

Uplift has been increased for wind or earthquake loading with no further increase allowed; reduce where
other loads govern.
Roof loads are 125% of floor loads unless limited by other criteria. Floor loads may be adjusted for load durations according
to the code provided they do not exceed those in the roof column.
Where the top of the carried member is flush with the top of the carrying member, H_eff is equal to the depth of the carried
member. Otherwise, H_eff shall be measured from the top of the bearing seat to the top of the carrying member.
NAILS: 10d = 0.148" dia. x 3" long, 10dx1 1/2 = 0.148" dia. x 1 1/2" long. See other nail sizes and information.

top Code Reports (PDFs):

					Legacy Reports
	IAPMO ES ER	ICC-ES ESR	CITY OF LOS ANGELES	STATE OF FLORIDA	ICC-ES NER	ICC-ES ER	ICC-ES ES
THAL422		ESR-2551 / ESR-2523 *	RR25804	FL10447
THAR422		ESR-2551 / ESR-2523 *	RR25804	FL10447

* ESR-2523 is an Index of many of Simpson Strong-Tie Stamped and Welded Cold-formed Steel Products for Wood or Cold-formed Steel Construction

topDrawings: To download drawings, right-click or Ctrl-click on the link, then choose "Save Target As..."

Download the Simpson Strong-Tie™ AutoCad® Menu, which allows you to insert Ortho views directly into your AutoCAD drawing.

	ORTHOGRAPHIC	PERSPECTIVE
THAL422	THAL422: DWG \| DXF THAL422 front view: DWG \| DXF THAL422 top view: DWG \| DXF	THAL422: DWG \| DXF
THAR422	None for this model	None for this model