×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

Strong-Drive® XL LARGE-HEAD METAL Screw (Collated)

Strong-Drive XL Large-Head Metal screws are load-tested and code-listed, allowing you to get the maximum load values for installation. These screws are the perfect choice when high shear or uplift resistance is required and can be excellent 1-for-1 replacements for pins.

Key Features

  • 5/16" hex drive (bit part number: BITHEXLB516)
  • #5 drill point
  • Quik Guard® coating
  • 5/8" diameter hex washer head
  • Also available in bulk for hand-drive installation

Applications

  • Steel decking or other cold-formed steel framing; connectors to structural steel

Warning

  • Industry studies show that hardened fasteners can experience performance problems in wet or corrosive environments. Accordingly, use this product in dry, interior and noncorrosive environments only.

Patent Information

  • US Patent 9,518,599

Related Links

The Steel Deck Institute updated the 4th Edition of the Diaphragm Design Manual (SDI-DDM04) to include Simpson Strong-Tie as an approved manufacturer of screws used for steel decking.

Catalog Pages

Related Literature

Product Information Table

Fastener Production Information and Stuff & Things
Model No. Coating/Material Screw Size Length (in.) Head Diameter (in.) Drive Type Head Type Thread Type TPI Max. Grip Length (in.) Point Type Point Size Compatible Tools Packaging Qty.
XLQ114T1224 Quik Guard® Coating #12 1 1/4 0.625 5/16 in. Hex Hex Washer Head Machine Threads 24 0.466 Drill Point 5 Quik Drive® BSD200G2 1000

Product Information Table

Model No. Length (in.) Drive Type Head Diameter (in.) Head Type Thread Type TPI Point Size Point Type Coating/Material Packaging Quantity Compatible Quik Drive® Tools UPC
XLQ114T1224 1 1/4 5/16 in. Hex 0.625 Hex Washer Head Machine Threads 24 5 Drill Point Quik Guard® Coating 1000 BSD200 707392140689

Load Tables

Screw Shear and Tension Strengths

  1. Pss and Pts are nominal shear strength and nominal tension strength for the screw itself, respectively, and are the average (ultimate) value of all tests determined by independent laboratory testing.
  2. The ASD and LRFD loads for tension are calculated using a safety factor Ω of 3.0 and the resistance factor Φ of 0.5, respectively.
  3. For tension connection: the smallest of the screw tension strength, pull-over strength and pull-out strength shall be used for design.

Structural Screw Pull-Over Strength with Steel Minimum Yield Strength Fy = 33 ksi

  1. Values are based on steel members with a minimum yield strength of Fy = 33 ksi and tensile strength of Fu = 45 ksi.
  2. The values for 16 ga., 18 ga., 20 ga. and 22 ga. are based on tests per AISI Standard Test Method S905.
  3. The safety factor Ω and resistance factor Φ used to determine the ASD and LRFD strengths are based on AISI S100.
  4. The values for 16 ga., 18 ga., 20 ga. and 22 ga. are based on the calculations per AISI S100.
  5. For tension connection: the smallest of the screw tension strength, pull-over strength and pull-out strength shall be used for design.

Structural Screw Pull-Out Strength

  1. Values are based on calculations per AISI S100.
  2. The tabulated ASD and LRFD loads are based upon a safety factor Ω of 3.0 and the resistance factor Φ of 0.5.
  3. For tension connection: the smallest of the screw tension strength, pull-over strength and pull-out strength shall be used for design.

For more information regarding these tables, please refer to IAPMO UES ER-326.

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT