Cedar and Redwood Decking Nail (Decking and General Wood Construction Nail)
Product Details
The cedar and redwood decking nail is an exterior nail that provides a powerful, corrosion-resistant fastening solution to help make your outside living space as long lasting as the interior of your home. The nail is designed for use in cedar and redwood decking projects and features an annular ring shank for increased withdrawal resistance. The small and compact head of this deck nail has a checker pattern that blends well with wood grain.
Key Features
- Smaller compact head is less visible
- Checker pattern on heads blends with wood grain and reduces glare from sunlight
- Annular ring shank increases withdrawal resistance to help prevent nail heads from popping up over time
- Slender shank permits nailing at board ends with reduced splitting
- Diamond point for easier driving
- Choose Type 316 stainless steel for seaside applications and superior corrosion resistance
- Hammer caps recommended for painted-head nails
Ordering Information
- These products are subject to quantities on hand or may require special ordering and are subject to minimum order quantities and longer lead times. Call Simpson Strong‑Tie for details (800) 999-5099.
Related Links
Catalog Pages
Related Literature
Product Information Table
Model No. | Coating/Material | Ga. | Penny Size | Length (in.) | Head Diameter (in.) | Shank Diameter (in.) | Shank Type | Head Type | Head Pattern | Point Type | Approx. Count per Lb. | Packaging Qty. |
---|---|---|---|---|---|---|---|---|---|---|---|---|
S10CRD1 | Type 304 Stainless Steel | 12 | 10d | 3 | 7/32 | 0.113 | Annular-Ring Shank | Full Round Head | Checkered | Diamond Point | 120 | 1 lb. |
S10CRD5 | Type 304 Stainless Steel | 12 | 10d | 3 | 7/32 | 0.113 | Annular-Ring Shank | Full Round Head | Checkered | Diamond Point | 120 | 5 lb. |
S10CRDB | Type 304 Stainless Steel | 12 | 10d | 3 | 7/32 | 0.113 | Annular-Ring Shank | Full Round Head | Checkered | Diamond Point | 120 | 25 lb. |
S8CRD1 | Type 304 Stainless Steel | 12 | 8d | 2 1/2 | 7/32 | 0.113 | Annular-Ring Shank | Full Round Head | Checkered | Diamond Point | 145 | 1 lb. |
S8CRD5 | Type 304 Stainless Steel | 12 | 8d | 2 1/2 | 7/32 | 0.113 | Annular-Ring Shank | Full Round Head | Checkered | Diamond Point | 145 | 5 lb. |
S8CRDB | Type 304 Stainless Steel | 12 | 8d | 2 1/2 | 7/32 | 0.113 | Annular-Ring Shank | Full Round Head | Checkered | Diamond Point | 145 | 25 lb. |
T10CRD1 | Type 316 Stainless Steel | 12 | 10d | 3 | 7/32 | 0.113 | Annular-Ring Shank | Full Round Head | Checkered | Diamond Point | 120 | 1 lb. |
T10CRD5 | Type 316 Stainless Steel | 12 | 10d | 3 | 7/32 | 0.113 | Annular-Ring Shank | Full Round Head | Checkered | Diamond Point | 120 | 5 lb. |
T12CRD1 | Type 316 Stainless Steel | 12 | 12d | 3 1/4 | 7/32 | 0.113 | Annular-Ring Shank | Full Round Head | Checkered | Diamond Point | 110 | 1 lb. |
T12CRD5 | Type 316 Stainless Steel | 12 | 12d | 3 1/4 | 7/32 | 0.113 | Annular-Ring Shank | Full Round Head | Checkered | Diamond Point | 110 | 5 lb. |
T8CRD1 | Type 316 Stainless Steel | 12 | 8d | 2 1/2 | 7/32 | 0.113 | Annular-Ring Shank | Full Round Head | Checkered | Diamond Point | 145 | 1 lb. |
T8CRD5 | Type 316 Stainless Steel | 12 | 8d | 2 1/2 | 7/32 | 0.113 | Annular-Ring Shank | Full Round Head | Checkered | Diamond Point | 145 | 5 lb. |
T8CRDB | Type 316 Stainless Steel | 12 | 8d | 2 1/2 | 7/32 | 0.113 | Annular-Ring Shank | Full Round Head | Checkered | Diamond Point | 145 | 25 lb. |
Code Reports & Compliance
Drawings
DWG | DXF | RFA | IFC | SAT | |||
---|---|---|---|---|---|---|---|