text.skipToContent text.skipToNavigation

SBV/CF-R Shelf Brackets / Concrete Form Angles

SBV/CF-R

On This Page

Use the SBV for shelving, counter brackets and window ledge supports, at a very competitive price.

The CF-R is used where a moderate-size shelf bracket and reinforcing angle is needed. When used for tilt-up perimeter forming, the nail hole placement ensures substantial reuse.

Material

  • 16 gauge

Finish

  • Galvanized

Installation

  • Use all specified fasteners; see General Notes.
  • SBV — reversible for nominal 10" or 12" shelves of any thickness.
  • CF-R (Retail Pack) — recommended spacing is 36" for 2x's and 18" for 1x's. Use the 5" leg for 6" lumber and the 6" leg for 8" lumber. Holes are sized for 1/4" fasteners or 0.148"-diameter nails or #9 Strong-Drive® SD Connector screws.

Related Literature

Load Tables

  1. Fasteners: SDS screws are Simpson Strong-Tie® Strong-Drive® screws. For additional information, see Fastener Types and Sizes Specified for Simpson Strong-Tie Connectors.

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT