×

We use cookies on this site to enhance your user experience. By clicking "I AGREE" below, you are giving your consent for us to set cookies. Privacy Policy

Steel Threaded Rod 

Strong-Rod® URS Components

This product's information may differ depending on the category of use. You are currently viewing details related to Strong-Rod® URS Components. You can also view product information related to the category: Strong-Rod® ATS Components

Strong-Rod fully threaded rod (all-thread rod) is the tension transfer element that can be used within both the Anchor Tiedown System for shearwall overturning restraint (ATS) and the wind uplift restraint (URS) system. Fully threaded rod is available in standard-strength, high-strength and higher strength rod material in diameters up to 2".

Key Features

  • Provides easy access to the top and bottom of the wall resulting in more efficient installation
  • Cut to length for convenience
  • Available in length increments up to 12'
  • Available in diameters up to 2"
  • UNC Class 2A or 1A thread specifications

Material

  • Standard (Model ATR_) – ATSM F1554 Grade 36, A36 or A307
    min Fy = 36 ksi, min Fu = 58 ksi and not to exceed 80 ksi
  • High-Strength (Model ATS-HSR_) – ASTM A449 Type 1, may be used for 1" diameter and under
    min Fy = 92 ksi, min Fu = 120 ksi
  • High-Strength (Model ATS-HSR_) – ASTM F1554 Grade 105 or A193 B7, may be used for all diameters
    min Fy = 105 ksi, min Fu = 125 ksi
  • Super High-Strength (Model ATS-HSSR_) – ASTM A354 Grade BD
    min Fy = 130 ksi, min Fu = 150 ksi

Related Literature

Load Tables

Steel Threaded Rod

URS Fully Threaded Rod Model No. Rod Dia. (in.) Gross Area Agross (in.2) Threads per inch, n Net Area An (in.2) Fu (ksi) Allowable Tension Capacity (lb.)
Based on Steel Stresses Based on 0.18" Elongation Limit for Maximum Rod Length of:
15' 25' 35' 45' 55' 65'
Footnotes
  1. Allowable tension capacities are based on AISC 360-16.
  2. No further increase in allowable load is permitted.
  3. Available in 1', 1 1/2', 2', 3' and 6' lengths.
  4. In accordance with ANSI/ASME B1.1, threaded specification for threded rod must be UNC Class 2A for high-strength rod and may be either Class 2A or Class 1A for standard-strength rod.
ATR3/8 3/8 0.110 16 0.077 58 2,400 2,250 1,350 960 750 610 520
ATR1/2 1/2 0.196 13 0.142 58 4,270 4,120 2,470 1,760 1,370 1,120 950
ATR5/8 5/8 0.307 11 0.226 58 6,675 6,550 3,930 2,810 2,180 1,790 1,510
ATR3/4 3/4 0.442 10 0.334 58 9,610 9,610 5,820 4,160 3,230 2,650 2,240
ATR7/8 7/8 0.601 9 0.462 58 13,080 13,080 8,040 5,740 4,460 3,650 3,090
ATR1 1 0.785 8 0.606 58 17,080 17,080 10,540 7,530 5,850 4,790 4,050
ATR1-1/8 1 1/8 0.994 7 0.763 58 21,620 12,620 13,270 9,480 7,370 6,030 5,100

Code Reports & Compliance

Drawings

PDF DWG DXF RFA IFC SAT