Coupler Nuts
Strong-Rod® ATS Components
This product's information may differ depending on the category of use. You are currently viewing details related to Strong-Rod® ATS Components. You can also view product information related to the category: Strong-Rod® URS Components
Product Details
CNW and ATS-C coupler nuts are used to connect one threaded rod to another and connect to anchor bolts within the Strong-Rod anchor tiedown system for shearwall overturning restraint. CNWs and ATS-C coupler nuts exceed the tensile capacity of the corresponding standard-strength threaded rod. ATS-HSC coupler nuts exceed the tension capacity of the corresponding high-strength threaded rod. All coupler nuts exceed 100% of the tensile capacity and 125% of the yield capacity of the corresponding standard-strength threaded rod. All coupler nuts are lot tested to ensure quality.
Finish
- Zinc plated, ATS-C couplers nuts available uncoated
Installation
- Tighten the two rods until each all-thread rod can be seen clearly through a Witness® Hole.
- For transition couplers, thread the coupler onto the larger rod first, and then thread the smaller rod into the coupler.
Related Links
Related Literature
Product Information Table
| Rod Dia. (in.) |
3/8 | 1/2 | 5/8 | 3/4 | 7/8 | 1 | 1 1/8 | 1 1/4 | 1 3/8 | 1 1/2 | 1 3/4 | 2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3/8 | CNW3/8 | – | – | – | – | – | – | – | – | – | – | – |
| 1/2 | – | CNW1/2 | ATS-HSC54 | ATS-HSC64 | – | – | – | – | – | ATS-HSC124 | ATS-HSC144 | ATS-HSC164 |
| 5/8 | – | CNW5/8-1/2 | CNW5/8 ATS-HSC55 |
ATS-HSC65 | ATS-HSC75 | ATS-HSC85 | ATS-HSC95 | ATS-HSC105 | – | ATS-HSC125 | ATS-HSC145 | ATS-HSC165 |
| 3/4 | – | ATS-C64 | CNW3/4-5/8 | CNW3/4 HSCNW3/4 |
ATS-HSC76 | ATS-HSC86 | ATS-HSC96 | ATS-HSC106 | ATS-HSC116 | ATS-HSC126 | ATS-HSC126 | ATS-HSC166 |
| 7/8 | – | ATS-C74 | CNW7/8-5/8 | ATS-C76 | CNW7/8 ATS-HSC77 |
ATS-HSC87 | ATS-HSC97 | ATS-HSC107 | ATS-HSC117 | ATS-HSC127 | ATS-HSC147 | ATS-HSC167 |
| 1 | – | ATS-C84 | ATS-C85 | ATS-C86 | CNW1-7/8 | CNW1 HSCNW1 |
ATS-HSC98 | ATS-HSC108 | ATS-HSC118 | ATS-HSC128 | ATS-HSC148 | ATS-HSC168 |
| 1 1/8 | – | ATS-C94 | ATS-C95 | ATS-C96 | ATS-C97 | ATS-C98 | ATS-C99 ATS-HSC99 |
ATS-HSC109 | ATS-HSC119 | ATS-HSC129 | ATS-HSC149 | ATS-HSC169 |
| 1 1/4 | – | ATS-C104 | ATS-C105 | ATS-C106 | ATS-C107 | ATS-C108 | ATS-C109 | CNW1 1/4 ATS-HSC1010 |
ATS-HSC1110 | ATS-HSC1210 | ATS-HSC1410 | ATS-HSC1610 |
| 1 3/8 | – | – | ATS-C115 | ATS-C116 | ATS-C117 | ATS-C118 | ATS-C119 | ATS-C1110 | ATS-C1111 ATS-HSC1111 |
ATS-HSC1211 | ATS-HSC1411 | ATS-HSC1611 |
| 1 1/2 | – | – | – | – | – | – | – | – | – | ATS-HSC1212 | ATS-HSC1412 | ATS-HSC1612 |
| 1 3/4 | – | – | – | – | – | – | – | – | – | – | ATS-HSC1414 | ATS-HSC1614 |
| 2 | – | – | – | – | – | – | – | – | – | – | – | ATS-HSC1616 |
- All ATS couplers available with over-sized threads on one side for use with HDG rod, ATS–Cxx–OST, ATS–HSCxx–OST and ATS–HSSCxx–OST.
- All CNW and HSCNW couplers are zinc plated.
- Couplers in the 1 3/4″ and 2″ series may be cylindrical.
- ATS–HSC couplers are used for both standard–strength and high–strength rods in 1 1/2″, 1 3/4″ and 2″ diameters.
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|