CIP-LO Low-Odor Paste-Over Epoxy and Crack Sealant
Cartridge Solutions
This product's information may differ depending on the category of use. You are currently viewing details related to Cartridge Solutions. You can also view product information related to the category: Crack Repair Accessories
Product Details
CIP-LO is a low-odor, fast-curing epoxy paste-over used to seal cracks and secure injection ports at the surface of concrete substrates prior to implementing an epoxy or urethane foam injection repair. When properly mixed, the product will be a uniform gray color. CIP-LO sets up rigid. When the crack repair is complete, the paste-over may be left in place or else ground or chiseled off the concrete substrate.
Key Features
- 1:1 two-component, high-solids, epoxy amine based adhesive
- Non-sag paste consistency for horizontal, vertical or overhead applications
- Fast cure times for shorter times between paste-over and injection
- Low-odor formulation
- Strong substrate bond; requires chipping to remove
- Gel Time — 6 minutes at 72°F (22°C), 28 minutes at 40°F (4°C)
- Cure Time — 75 minutes at 72°F (22°C), 2 hours at 60°F (16°C) and 4–5 hours at 40°F (4°C)
- Volatile organic compound (VOC) — 4 g/L
- Manufactured in the USA using global materials
Included Parts
| Model No. | Option | Packaging Qty. | Carton Qty. | Compatible Tools |
|---|---|---|---|---|
| CIPLO22 | Low-odor crack-injection paste-over, 22 oz. cartridge | 1 | 10 | EDT22S, EDTA22CKT, EDTA22P dispensing tools / EMN22I mixing nozzle (included) |
| CIPLO2KT | Low-odor crack-injection paste-over, 2 gal. kit | 1 | 1 | – |
Storage Conditions
- For best results, store between 45°F (7°C) and 90°F (32°C)
Shelf Life
- 24 months from date of manufacture, unopened
Installation
- Apply to concrete 40°F (4°C) or above. For best results, warm material to 65°F (16°C) or above prior to application.
Related Literature
Code Reports & Compliance
Drawings
| DWG | DXF | RFA | IFC | SAT | |||
|---|---|---|---|---|---|---|---|
