Water treatment, sewage, and wastewater facilities operate in extreme environment conditions. We offer a wide range of products in mechanical anchors, high-strength adhesives, Composite Strengthening Systems™ and crack repair to provide solutions for fast and efficient installation, combined with long-lasting corrosion resistance for unsurpassed peace of mind.
Our people are always there to help your projects run smoother, faster and smarter. As a leader in innovation, research and testing, Simpson Strong-Tie is one of North America’s largest suppliers of structural building products. With facilities from coast to coast and a distribution network that’s second to none.
Stainless-Steel Titen HD® Screw Anchor is the ultimate choice to provide fast and efficient installation, combined with long-lasting corrosion resistance for unsurpassed peace of mind.
A wedge-type expansion anchor designed for optimal performance in cracked and uncracked concrete as well as uncracked masonry. The Strong-Bolt 2 is available in carbon steel, Type 304 and Type 316 stainless steel.
A non-bottom-bearing, wedge-style expansion anchor for use in solid concrete or grout-filled masonry. The Wedge-All wedge anchor is available in carbon steel with zinc or mechanically galvanized coating, as well as Types 303/304 and Type 316 stainless steel.
Sleeve-All expanding anchors are pre-assembled, expanding sleeve anchors for use in all types of solid base materials. This anchor is available in acorn, hex, rod coupler, flat or round head style for a wide range of applications.
Drop-In anchor (DIAB) provides easier installation into base materials. The preassembled expansion plug setting capability yields 40% fewer hammer strikes than other versions.
SET-3G™ High-Strength Epoxy Anchoring Adhesive
SET-XP® High-Strength Epoxy Anchoring Adhesive
AT-XP® High-Strength, Fast-Cure, All-Weather Acrylic Anchoring Adhesive
SET-3G is high-strength an epoxy anchoring adhesives. SET-3G can be Installed in extreme concrete temperatures from 40°F to 100°F, as well as in dry or water-filled holes in concrete. The code-listed SET-3G provides the high bond strength values needed for a variety of adhesive anchoring applications.
The Speed Clean DXS dust extraction system is a drilling system that reduces health risks from airborne silica dust caused by the hole-drilling and cleaning processes. The Speed Clean DXS system simultaneously drills and cleans holes using a hollow centered bit for rebar doweling or anchoring threaded rod and is code listed for use with AT-XP, SET-XP and SET-3G.
Simpson Strong-Tie Composite Strengthening Systems (CSS) provide efficient fiber reinforced polymer (FRP) solutions for the structural reinforcement and strengthening of concrete, masonry and timber structures in need of repair or upgrade.
Repair, protect and strengthen aging, damaged or overloaded concrete and masonry structures in one application and significantly reduce your installed cost.
Specifying Simpson Strong-Tie Composite Strengthening Systems™ is unlike choosing any other product we offer. Leverage our expertise to help with your FRP strengthening designs.
ETI injection epoxies are two-component, high solids formulations for injection into cracks in concrete. Dispensed through a static mixing nozzle using either a manual, battery-powered or pneumatic dispensing tool, these epoxies provide a waterproof, high-strength structural repair. Available in three viscosities for cracks ranging from 0.002" to 1/4". ETI-LV is NSF/ANSI 61 approved.
The Crack-Pac Flex-H2O polyurethane injection resin seals leaking cracks, voids or fractures from 1⁄32" to 1/4" wide in concrete or solid masonry. Designed to perform in applications where water is seeping or mildly leaking from the crack, the polyurethane is packaged in the cartridge and an accelerator is packaged in the nozzle. When the resin encounters water as it is injected into the crack, it becomes an expanding foam that provides a flexible seal in leaking and non-leaking cracks.