text.skipToContent text.skipToNavigation

Face-Mount Hangers – Load Tables for Structural Composite Lumber

    These products are available with additional corrosion protection. Additional products on this page may also be available with this option, check with Simpson Strong-Tie for details.

See footnotes. See footnotes.
  1. Uplift loads based on DF/SP lumber and have been increased for wind or earthquake loading with no further increase allowed. Reduce where other loads govern. For SPF/HF, use 0.86 x DF/SP Uplift Load for products requiring nails and 0.72 x DF/SP Uplift Load for products requiring screws.
  2. MIN nailing quantity and load values – fill all round holes;
    MAX nailing quantity and load values – fill all round and triangle holes.
  3. Hangers sorted in order of recommended selection for best overall performance and installation value.
  4. Allowable downloads are based on a joist bearing capacity of 750 psi.
  5. Nails: 16d = 0.162" dia. x 3 1/2" long, 10d = 0.148" dia. x 3" long, 10d x 1 1/2" = 0.148" dia. x 1 1/2" long.
    See other nail sizes and information.